TEKNOLOGI TERBARU DARI MERCEDES BENZ E Class

Salah satu fitur baru yang dipasang di Mercedes-Benz E-Class (W212) Facelift adalah Active Parking Assist (APA). Ini adalah teknologi yang membantu pengemudi untuk menemukan ruang dan memarkirkan kendaraan di tempat tersebut. Saat mencoba Mercedes-Benz E 250

Untuk simulasi ini menggunakan smart fortwo dan Mercedes-Benz B-Class untuk menciptakan ruang parkir. Smart di taruh di depan sedang B-Class sekitar 5 meter di belakangnya. Ruang di antara keduanya merupakan tempat parkir yang dituju.

Di sini yang diuji hanya parkir pararel saja. Sebenarnya teknologi APA ini juga bisa untuk parkir mundur. Berbeda dengan fitur serupa di pabrikan lain, teknologi APA di E-Class secara otomatis mendeteksi ruang parkir yang tersedia dan menentukan teknik parkir yang digunakan (pararel atau mundur).

Oh ya, ada satu lagi kelebihan teknologi APA dibanding sistem bantu parkir milik pabrikan lain yang juga beredar di sini. Teknologi APA enggak Cuma memambatu pengemudi masuk ke ruang parkir, tapi juga keluar dari tempat parkir.

Pengoperasian yang Sederhana
Cara mengoperasikan APA sangat mudah, tinggal menyalakan lampu sein saja. Bila tempat parkir di sisi kanan Anda, aktifkan lampu sein kanan. Begitu sebaliknya.

Setelah itu jalankan mobil perlahan, sekitar 10-20 km/jam saja. Dua sensor ultrasonik yang ada di bumper depan akan mendeteksi ruang parkir yang tersedia. Bila sudah ditemukan akan muncul simbol “P” dengan “panah kecil” yang menunjukkan tempat parkir. Langsung tekan tombol “OK” di setir.

Lihat layar MID (multi information display), akan muncul perintah untuk memasukkan gigi mundur (R). Segera jauhkan tangan dari setir karena komputer sudah mengambil alih tugas memutar kemudi.

Tugas Anda hanya dua. Pertama, mengatur pedal gas dan rem. Pastikan mobil bergerak perlahan, kecepatan paling tinggi 10 km/jam. Kedua, memindahkan tuas transmisi ke posisi “D” atau “R” sesuai dengan perintah di MID.

walau komputer yang mengatur putaran setir dan sudut masuk mobil, Anda masih tetap perlu memantau kondisi sekitar mobil. Selain pengamatan visual, Anda akan dibantu sistem radar (Parktronic) yang mendeteksi jarak bodi mobil dengan halangan di belakang.

Dalam 2 kali percobaan yang dilakukan mobil sudah parkir dengan sempurna dengan 3 dan 4 gerakan saja. Soalnya, para insinyur Mercy memastikan mobil sudah terparkir sempurna dengan maksimum 5 gerakan atau manuver. Bila mobil sudah terparkir dengan sempurna akan muncul pesan di MID berbunyi “Parking Assist Complete”.

Keluar dari Tempat Parkir
Proses untuk keluar dari ruang parkir juga bisa menggunakan teknologi APA. Cara menggunakannya pun semudah saat memasukkan mobil ke ruang parkir.

Untuk mengaktifkan tinggal nyalakan lampu sein ke arah keluar mobil. Saat pengujian mobil di parkir di sisi kanan jalan, sehingga untuk keluar dari ruang parkir mesti menghidupkan sein kiri.

Begitu sein hidup, akan muncul pertanyaan di MID apakah Anda mau mengaktifkan APA. Lalu tekan tombol “OK” di setir” dan lepaskan tangan dari setir. Jangan lupa periksa keadaan sekeliling mobil sebelum mengikuti perintah selanjutnya yang tampil di MID.

Di sini perintah dan tugas yang muncul sama dengan saat masuk ke ruang parkir. Anda hanya perlu memasukkan gigi ke D atau R sesuai perintah komputer dan mengontrol pedal rem dan gas. Putaran setir diatur secara otomatis oleh komputer mobil.

Sama seperti tadi, setelah 3 dan 4 manuver saja mobil sudah berhasil keluar dari tempat parkir dengan selamat. Menurut kami, teknologi APA ini sangat menyenangkan dan memudahkan pengemudi untuk parkir. Khususnya bagi mereka yang menganggap parkir itu sebuah mimpi buruk.

Manage Waste On Our School

     Recycling process is the guardian of nature preservation. Waste is not actually waste, but the resources of raw materials to the recycling process which produces humus or compost, fertilizer natural creation protector / soil builder. Continue turning recycled natural cycle is a key safety earth, are the responsibility of human beings in their respective communities. So that the waste is the responsibility of us all to recycle it into compost for the safety of the earth.

Recycling is the reuse of materials / goods that are not used to being another product. In addition to working to reduce the amount of waste that must be disposed of in landfills (landfill). Recycling of useful raw materials to meet the need for a product. And in terms of fuel use recycled can save the energy that must be removed to a factory.

      The steps that need to be done to recycle: Separation. Separate the items / materials that can be recycled by the waste should be disposed of to landfill. Make sure the material is vacant and would be better if in a clean state. Storage. Save items / materials that have been separated was dried in a box / closed box depending on the type of goods, such as boxes for waste paper, bottles, etc.. If it will make compost, household waste pile composting on site. Delivery / Sales Items collected are sold to manufacturers who require such waste materials as raw materials sold to scavengers. 

      The garbage can be divided into 3 types, namely:

           I. An Organic Garbage bins are not easily broken / obsolete is not a liquid and gas and is often referred to as dry waste. Inorganic garbage is divided into 2 parts:
a. Obsolete goods. Items that can be recycled back in clean and undamaged condition, has a high economic value. Example: Metal, iron, tin, plastic, rubber, etc..
b. Not an organic waste rotting stuff that really damaged and can not be traded so it has no economic value.

          II. Organic waste bins are easily weathered / destroyed, instead of a liquid / gas and is often called the wet garbage. Organic waste consists of 3 parts:
a. Fresh organic waste, such as kitchen scraps, orchards, markets and restaurants.
b. By organic waste such as paper, cardboard, etc..
c. Organic waste recycling options for selected organic waste into compost that is fresh and soft and does not include harsh shaped like a soggy leftover vegetables, spices and remaining fruit.

        III. Hazardous Waste garbage that requires special care to neutralize the pollution. This trash should be separated from the others so that the recycling process more quickly and produce products that are free of hazardous materials. Example: broken glass & glass, residual chemicals, batteries, bottles of insect repellent and nails. 

COMPOST MAKING FROM OUR SCHOOL
        Principles of composting organic waste material containing school + 75%. Composting process of adjusting to the availability of raw materials, which are not collected in large quantities at once, but little by little every day. This condition occurs in nature as the forest floor, where the organic remains fell onto the ground layer by layer until it becomes thick. Overhaul-fermentation process occurs from the bottom soil organisms spread to the pursuit of new materials that fall, followed by the formation of humus from the ground up anyway. Composting speed depends a.1. on the composition of raw materials, the comparison level C (high fibrous material) with N levels (types of legumes, manure, etc..). For optimal compost feedstock ratio C / N = + 30, the final result is humus or mature compost C / N = 12-15 Method and Tool Making compost is actually easy and simple, but because of its location in the yard of the house must be free of odor pollution , flies, dangerous animals and free of distractions chickens, dogs, cats, etc.. Moreover, the organic remains uncollected at once but gradually every day from kitchen waste and yard dirt.
    For composting in the school yard, it takes two kinds of containers:1. Large container, container material and the site of the composting process, which is called "Compost" and placed in the garden in the shade.2. Small container in the form of a small plastic bucket with a lid, a temporary shelter kitchen organic waste.
    Compost tool is the most practical and safe tool recommended STU Campbell (book "let It Rot", Storey Books, Vermont 1998) for use in the yard. Compost is made from 200 liter drums, the walls removed, and the walls of the base to be able to enter the middle dilobangi 3-4 inch PVC pipe, which also serves drainage. On a 5-cm PVC pipe made hole (drill) along the four sides. Mounted drum stand, given the prop 2-3 layers of bricks. PVC pipe is inserted into the hole basis, until the lower end touching the ground and the upper end of the drum stand up + 10 cm, through the midst of additional cap (can be made from plywood). Small bucket plastic bucket 5 l - 10 l is a lid, reserved for temporary shelter (1-2 days) residual organic orgasisa always placed in the kitchen and the kitchen is closed. 

  How it Works Composter (drums) placed in the yard in the shade. Should be made of plywood lid over the middle hollow where the advent of PVC pipe. Every time cleaning the yard, in the form of crumbling dirt leaves, grass fence pieces, etc. put into the composter, flattened, slightly compacted and sprinkled on top of a layer of old manure, compost or undercooked new, black fertile soil, and so on. as a starter enhancer N and soil organisms.
   If it is too dry to moist and water were shut down to prevent from excessive rain, sun and pollution flies. To facilitate container near the composter supplied starter (cattle dung, etc.) are always closed. Every one or two days, a small bucket of dirt in the kitchen that is full, also included, flattened and coated starter.
  So charging is done every time collected organic waste or feces new kitchen, to the composter is full, which takes 1 month - 2 months for a family is. Once full, closed and left behind and forth for 1 month + composting expected to be completed in the form of mature compost black, crumbs and smelling fresh. Composter emptied, its contents aerated, can directly be used alone or filtered (filter wire netting) wrapped and sold.
  Occurred since the beginning of the composting process of organic matter incorporated, and propagate upward following the new organic materials. This will prompt a hot fermentation by thermophilic bacteria, as the temperature can rise within enclosed composter, which is also useful to kill seeds and weed pest. Composter is full and I are currently in the process pemasakkan, replaced composter II that had been prepared and later after I finished dokosongkan composter, be prepared to replace the composter II when it is full, and so on. 

  Organic materials in the school consists of leaves, paper, leftover side dishes, separated from the rest / non-organic waste. Kitchen waste is put into a small bucket and a non-organic accommodated in another container for disposal in the trash. Every time you include the rest of perishable organic kitchen (the rest of the side dishes), directly on top of a layer of fine sawdust sprinkled meetings. Then in the kitchen is always provided fine sawdust in a special container. Small bucket must always be sealed and usually within 1-2 days is full, then immediately taken to put in a garden composter, and sprinkled a layer on top of the starter.

   So as not to dirty plastic buckets, plastic bags should be coated so that the rest of perishable organic kitchen can fit securely and tightly. If it can be realized every household willing and able to recycle organic waste yard, and kitchen into compost, then dumped household waste is low and does not cause environmental pollution.

   Lived waste disposed in the form of non-organic waste such as used goods plastic, tin, iron, etc and a little hard of organic waste such as scrap items of wood, bamboo, cardboard, hard rind and most of these items can be exploited through scavengers. In this way almost all the organic material that can be recycled urban waste problem can be solved in a healthy and supportive safety earth.

   One thing, where people have not managed to connect the disconnected recycling cycle, namely the problem of impurities (taeces) and human urine because it is still hampered by cultural issues. 











 

Polystyrene

            Polystyrene (PS)  is a synthetic aromatic polymer made from the monomer styrene, a liquid petrochemical. Polystyrene can be rigid or foamed. General purpose is hard and brittle. It is a cheaper resin per unit weight. It is a rather poor barrier to oxygen and water vapor and has relatively low melting point.Polystyrene is one of the most widely used plastics, the scale of its production being several billion kilograms per year.Polystyrene can be naturally transparent, but can be colored with colorants. Uses include protective packaging (such as packing peanuts and CD and DVD cases), containers (such as "clamshells"), lids, bottles, trays, tumblers, and disposable cutlery.

           As a thermoplastic polymer, polystyrene is in a solid (glassy) state at room temperature but flows if heated above about 100 °C, its glass transition temperature. It becomes rigid again when cooled. This temperature behavior is exploited for extrusion, and also for molding and vacuum forming, since it can be cast into molds with fine detail.

            It is very slow to biodegrade and therefore a focus of controversy, since it is often abundant as a form of litter in the outdoor environment, particularly along shores and waterways especially in its foam form.

            Polystyrene was found in 1839 by Eduard Simon,an apothecary in Berlin. From storax, the resin of the Turkish sweetgum tree Liquidambar orientalis, he distilled an oily substance, a monomer that he named styrol. Several days later, Simon found that the styrol had thickened, presumably from oxidation, into a jelly he dubbed styrol oxide ("Styroloxyd"). By 1845 English chemist John Blyth and German chemist August Wilhelm von Hofmann showed that the same transformation of styrol took place in the absence of oxygen. They called their substance metastyrol. Analysis later showed that it was chemically identical to Styroloxyd. In 1866 Marcelin Berthelot correctly identified the formation of metastyrol/Styroloxyd from styrol as a polymerization process. About 80 years later it was realized that heating of styrol starts a chain reaction that produces macromolecules, following the thesis of German organic chemist Hermann Staudinger (1881–1965). This eventually led to the substance receiving its present name, polystyrene.

            The company I. G. Farben began manufacturing polystyrene in Ludwigshafen, about 1931, hoping it would be a suitable replacement for die-cast zinc in many applications. Success was achieved when they developed a reactor vessel that extruded polystyrene through a heated tube and cutter, producing polystyrene in pellet form.

             In 1941, Dow Chemical invented a Styrofoam process.Before 1949, the chemical engineer Fritz Stastny (1908–1985) developed pre-expanded PS beads by incorporating aliphatic hydrocarbons, such as pentane. These beads are the raw material for moulding parts or extruding sheets. BASF and Stastny applied for a patent that was issued in 1949. The moulding process was demonstrated at the Kunststoff Messe 1952 in Düsseldorf. Products were named Styropor.The crystal structure of isotactic polystyrene was reported by Giulio Natta.

             In 1954, the Koppers Company, Inc. in Pittsburgh, Pennsylvania, developed expanded polystyrene (EPS) foam.In 1960, Dart Container, the largest manufacturer of foam cups, shipped their first order.In 1988, the first U.S. ban of general polystyrene foam was enacted in Berkeley, California.

This Picture is about yogurt container

Melamine resin with Apllication

                              Melamine resin or melamine formaldehyde (melamine) is a hard thermosetting plastic material made from melamine and formaldehyde by polymerization. In its butylated form, it is dissolved in n-butanol and xylene. It is used to cross-link with alkyd, epoxy, acrylic, and polyester resins, which used in surface coatings. There are many types, varying from very slow to very fast curing. It was discovered by William F. Talbot.


                      Melamine resin is often used in kitchen utensils and plates (like Melmac). Melamine resin utensils and bowls are not microwave safe. As with all thermosetting materials, melamine resin cannot be melted. Therefore, cannot be recycled through melting.
During the late 1950s and 1960s melamine tableware became highly fashionable. Aided crucially by the stylish modern designs of A. H. Woodfull and the Product Design Unit of British Industrial Plastics, it was thought to threaten the dominant position of ceramics in the market. The tendency of melamine cups and plates to stain and scratch led sales to decline in the late 1960s, however, and eventually the material became largely restricted to the camping and nursery market.






This picture is melamine plate

LDPE (Low density polyethylene), chemical and apllication

             Low-density polyethylene (LDPE) is a thermoplastic made from the monomer ethylene. It was the first grade of polyethylene, produced in 1933 by Imperial Chemical Industries (ICI) using a high pressure process via free radical polymerization. Its manufacture employs the same method today. The EPA estimates 5.7% of LDPE (recycling number 4) is recycled. Despite competition from more modern polymers, LDPE continues to be an important plastic grade. In 2009 the worldwide LDPE market reached a volume of US$22.2 billion (15.9 billion Euro).

              LDPE is widely used for manufacturing various containers, dispensing bottles, wash bottles, tubing, plastic bags for computer components, and various molded laboratory equipment. Its most common use is in plastic bags. Other products made from it include:

• Trays and general purpose containers
• Corrosion-resistant work surfaces
• Parts that need to be weldable and machinable
• Parts that require flexibility, for which it serves very well
• Very soft and pliable parts such as snap-on lids
• Six pack rings
• Juice and milk cartons are made of liquid packaging board, a laminate of paperboard and LDPE (as the water-proof inner and outer layer), and often with of a layer of aluminum foil (thus becoming aseptic packaging).
• Parts of computer hardware, such as hard disk drives, screen cards, and optical disc drives
• Playground slides
• Plastic wraps

             

Chemical resistance

• Excellent resistance (no attack) to dilute and concentrated acids, alcohols, bases and esters
• Good resistance (minor attack) to aldehydes, ketones and vegetable oils
• Limited resistance (moderate attack suitable for short-term use only) to aliphatic and aromatic hydrocarbons, mineral oils, and oxidizing agents
• Poor resistance, and not recommended for use with Halogenated hydrocarbons.

This picture is ID code of LDPE (Low density polyethylene)

THE ZOO

                       One day, the zoo was crouded. Because at the day is sunday and the zoo has events. Many family goes to the zoo. When people come to the zoo, the old lion was sleeping.

                        "Lions ought not to behave like that!" the young lion said to himself, so he roared at all the visitors and tried to break the bars of the den.

                          At three o'clock a man brought a big piece of meat and put it in the old lion's den. Then, he put a bag of nuts and two bananas in the young lion's den.

                          The young lion was very surprised. "I don't understand this." he said to the old lion. "I behave like a real lion, while you lie there and do nothing and look what happens!"


                           "Okay, I'll behave like a real lion" said the old lion, and the old lion was roared to all visitors. Many people came closer to their cage. So their visitor was very happy and many visitor buy some meat for it. And the lion was happy.